They will be found on plans for everything from offshore drilling platforms, big box stores, renovations, or any structure where the stress of movement, expansion and contraction needs to be relieved.

VOC Trends Continue to move levels lower

Still one of the most useful tools in the box, the BLEED THROUGH BLUE marker helps fabricators mark steel once and have the marks remain visible throughout the fabricating and erecting process. After primer coats are applied the marks bleed through and remain clearly visible.

The Most Efficient Method of Sealing Vent Holes After Hot Dip Galvanizing

Hot Dip Galvanizing and Cold Galvanizing each have advantages.

There are many specifications written covering Anchor Bolts but the predominant one we see called out on drawings is ASTM F1554. The most current version is ASTM F1554-20. It covers exclusively the requirements for manufacturing Cast In Place Anchor Bolts.

Extended Length Slotted Shim Manufacturing

Variables such as heat, deflection and dross will affect how slotted steel shims are produced to get the most accurate, cost efficient and serviceable results.

The Steel Supply company carries many options when it comes to slide bearings, including: Fluorogold®, Teflon® (PTFE, or polytetrafluoroethylene), Carbon Filled PTFE, and Graphite. 

Oftentimes a masking material is applied to steel prior to galvanization. The masking agent prevents galvanization from occurring on the steel surface to which it l is applied. This can be useful for several reasons. The Steel Supply Company most commonly sees masking materials used on threaded bolts. If a precise fit is required between the threading and its nut, the additional width that galvanization creates within the threads can cause an issue. While this is a common use case for masking material, there are a myriad of other applications.

In the last post about galvanized vent hole plugs, we covered the difference between aluminum and zinc vent hole plugs and the circumstances in which each one is best suited.