In the field of Steel Fabrication Teflon®, PTFE and Fluorogold® are most often bonded to steel backing plates to form Slide Bearings. This type of assembly works very well when the anticipated movement will only be horizontal, such as expansion or contraction. Occasionally the application requires the bearing to also allow for some movement or cushioning vertically. In cases like these, the bearing design can have a standard thickness, sliding surface bonded to a commercial rubber cushion.

 For any product manufactured from stainless steel, it is important to consider if it will be visible in the finished assembly. This is especially true for Anchor Bolts, Turnbuckle Rods and Clevis Rod Assemblies. If so, the fabricator should know that to prevent rust from appearing on the surface, the item should be passivated after all fabricating and machining is complete.