Most Masonry Anchors are intended to be welded to Columns or Beams running straight up and down; i.e. perpendicular to the foundation. This is true of Rod Anchors, sometimes referred to as Weld-On Wire Ties, shown in the photos below and Slotted Channel, which is also called a Gripstay™ Channel or Channel Slot Anchor.
Steel Manufacturing Blog: Keeping it Steel
An often overlooked issue with Slide Bearings is the system of welds. Before beginning the process the steel fabricator should understand what effect the weld will have on the Slide Bearing.
1 Comment Click here to read/write comments
Tags: Slide Bearing